Frequently Asked Questions
We’ve compiled a list of frequently asked questions to help you better understand our company, our capabilities, and our products and services.
How can we address the issue of chain skipping or even coming off the sprocket during the transmission process in mining operations, resulting in unusual noises?
Main causes: The chain pitch has elongated due to prolonged use, resulting in a mismatch with the sprocket tooth profile; insufficient tension or failure of the tensioner; severe wear on either the sprocket or the chain.
Solution: Adjust the chain tension and inspect and replace any chains or sprockets that are severely worn.
How can gear pitting failures in metallurgy be avoided?
In metallurgy, gear scuffing failures can be effectively prevented by selecting lubricants with appropriate viscosity, controlling the load and rotational speed of gear transmissions, and ensuring optimal lubrication conditions. Under high-speed and heavy-load operating conditions, lubricants containing anti-scuffing additives should be used to prevent oil film breakdown. At the same time, it is important to control the surface roughness and contact stress of gear teeth to avoid direct metal-to-metal contact and subsequent welding.
How can common pitting and spalling failures in metallurgical gear drives be prevented?
The failure modes of pitting and spalling in metallurgical gears can be effectively prevented by increasing the surface hardness of gear teeth, reducing surface roughness, and selecting an appropriately viscous lubricant. Given the dusty conditions typical in metallurgical environments, it is essential to enhance filtration in the lubrication system to ensure that the lubricant remains clean and to avoid contact stresses exceeding the material’s fatigue limit. Additionally, using modified gear transmissions can help optimize the distribution of contact stresses on the tooth surfaces.
How should the oil leakage fault in the coupling of an energy power system be handled?
Methods for handling oil leakage faults in energy and power couplings: 1) Enhance sealing performance by selecting high-quality seals to prevent the rubber seal rings from aging and failing due to rising oil temperature and pressure; 2) Regularly inspect the condition of the lubricating oil and promptly replace any deteriorated lubricant; 3) Control the coupling’s operation under overload conditions to avoid damage to the seals caused by excessive load; 4) Strengthen equipment maintenance by regularly cleaning sealing areas and keeping them free of dirt and debris.
What are the causes of abnormal wear in bevel gears?
Reason: Improper adjustment of the motor height, excessive shims, or insufficient lubrication can all lead to tooth surface wear and even tooth breakage.
Appearance: Pitting and spalling have appeared on the tooth surfaces, the contact area has decreased, and significant wear is evident at the tooth ends.
Solution: Adjust the motor height, check the gaskets, and ensure adequate lubrication.
What causes abnormal noises during the operation of bevel gears?
Reasons: Abnormal gear meshing (such as wear, tooth breakage, or improper clearance), bearing failure, or foreign object intrusion.
Symptoms: metallic friction sounds, periodic knocking sounds, or rustling noises.
Solution: Disassemble and inspect the gears, adjust the meshing clearance, verify installation accuracy, and clean the gear box.
Seeking cooperation
We are a specialized company that integrates manufacturing, trade, and service, and continuously focuses on heavy industries such as heavy equipment and mechanical processing, offering customers one-stop services.
Mobile phone/WeChat
8618617733332(Xu Changyang)
Address
Chengdong Development Zone, Renqiu City, Cangzhou City, Hebei Province